Electron Gun Parts are very delicate and require careful handling, so Elscint provides PU lining for the the Vibratory Bowl Feeders used for them
Elscint Automation, the manufacturer of Vibratory bowl feeders in India, has developed a lot of expertise in feeding of Electron Gun Parts. These parts are very delicate and require careful handling. Orientation is difficult though speeds are not very high.

For this Elscint provides PU lining for the bowls.

For taking care of the critical orientation, the bowls are CNC Machined from Stainless Steel.

Due to the high and quick requirement for these types of Bowl Feeders, Elscint keeps such bowls in stock so that the delivery time is reduced.

They are available at a very reasonable price.

Innovative, modular, carriage and rail production system can be used by assembly, process and manufacturing companies to reduce costs and increase productivity.
THK, one of the world’s leading manufacturers of linear motion technology, has launched a completely new and innovative carriage and rail production system, that can be used by assembly, process and manufacturing companies to reduce costs and increase productivity. The new system is called the HMG Multi-motion Guide and essentially comprises a series of modular track or rail sections with the latest specification THK linear motion guide technology. Track sections are available in a wide range of lengths, widths and straight and curved formats, enabling almost any configuration of production track to be constructed, with single or multiple carriages or blocks being used to move and position workpieces allowing variable capacity.

Unlike traditional production track equipment, the HMG system uses purpose designed linear motion components to ensure that each carriage moves consistently and accurately regardless of the set-up of the rail.

This eliminates potential variations in tolerances between different sections of track and ensures a smooth, almost friction-less motion, with positional accuracy of within +/-0.1mm.

Typical track configurations are circular, U-shaped, L-shaped or S-shaped.

In each case, it is possible to make considerable savings in design and construction time and cost.

For example, a conventional rectangular production track typically incorporates a turntable at each corner to re-align pallets or workpieces; using the HMG system the turntable units can be replaced with a simple curved section of track, allowing the linear motion carriages to move in a continuous path.

Similarly, several rails can be mounted in parallel, while heavier loads can be accommodated by using multiple rails or carriages.

The linear motion guides are robust, high performance units and are capable of being loaded in radial, reverse-radial and lateral directions, with a maximum static load rating of 66.7kN on a single carriage.

They are low maintenance and have a long operating life; a range of options including scraper seals is also available.

A measurement amplifier simplifies two-channel manufacturing and testing processes, such as press-fit monitoring, to ensure greater fitting accuracy.
The new MP85 measurement amplifier from HBM simplifies two-channel manufacturing and testing processes, such as press-fit monitoring, by checking two inter-related signals ensuring the optimum combination is obtained for greater fitting accuracy. This is beneficial, for example, during the press fitting of bearings or sleeves, when the applied force can be checked against the displacement curve, to give clear guidance on the process quality. Similar two-channel processes happen when monitoring clinching and fitting during assembly tasks.

The MP85 can also be used for monitoring rotational torque or angle curves in component and function testing, or for circularity tests where the rotational angle and displacement must be evaluated.

Almost any sensor can be connected to the MP85, such as strain gages, inductive or incremental transmitters, and SSI transducers.

The MP85 uses high-performance algorithms for curve evaluation with a maximum of nine predefined windows for each curve, or one master curve with envelope as evaluation criteria.

Users have the option of switching between absolute and relative reference co-ordinates to simplify parameter setting.

The MP85 uses digital I/Os to save statistics on component quality, either on a PC or an internal MMC card for later archiving.

The MP85 is available in a Profibus version, the MP85DP, ensuring optimum connectivity in the automation environment through canopen and Profibus interfaces or digital I/Os.

To complement its amplifiers, HBM supplies a complete range of force, pressure and displacement transducers and torque flanges for comprehensive monitoring of production processes.

About HBM - HBM is a globally operating company specializing in test and measurement.

HBM provides complete measurement solutions - from sensor to software - based on high quality products as strain gages, load cells, tranducers, signal conditioning and data acquisition electronics and software.

With development and manufacturing operations in Europe, America and Asia, HBM provides measurement solutions to a wide variety of companies in the automotive, aerospace, marine, rail transport, medical equipment, packaging, appliance, automation, and scale industries.

With a 50 year history of quality and precision products, the HBM name has become synonymous with ‘Measurement with Confidence.

Featuring a radical new design, latest brochure gives a colourful introduction and technical information on software, networks, PLC’s, HMI’s, inverters, motion control and robots.
Featuring a radical new design, the latest issue gives a colourful introduction to the Mitsubishi range before giving more technical information on Software, Networks, PLC’s, HMI’s, Inverters, Motion and Servo systems, Low voltage products and Robots. The Concise Version 6 brochure is the essential information resource for any Mitsubishi Electric user, giving a useful overview of the full Automation and Motion control product ranges. The eagerly awaited Concise Version 6 has just been launched and is now available from LC Automation - the largest supplier of Mitsubishi Electric products in the UK.

Featuring a radical new design, the latest issue gives a colourful introduction to the Mitsubishi range before giving more technical information on Software, Networks, PLC’s, HMI’s, Inverters, Motion and Servo systems, Low voltage products and Robots.

It also includes a short form price list and information on the many resources available on the Mitsubishi websites, making it easily the most user friendly Concise ever! It also highlights the innovative new products that are now available from Mitsubishi including the excellent MX4 SCADA software and the Alpha 2 family of compact controllers.

A vibratory bowl feeder that feeds flare nuts in two rows to flaring machines at up to 300 parts/min avoids the need for having to use a second feeder when two rows are wanted.
Elscint Automation, the ISO 9001:2000 certified vibratory bowl feeder manufacturer from India manufactures a vibratory bowl feeder for feeding of flare nuts to flaring machines in double rows. Elscint has a lot of expertise in feeding of flare nuts and in this type of vibratory bowl feeder, two rows of flare nuts can be fed side by side in separate orientation in each row. This gives more output and eliminates the need of a separate bowl feeder when two rows of flare nuts are required.

For this, either the Elscint Vibratory Bowl Feeder Model 250 or Model 400 can be used.

Feed rates or the speeds that can be achieved can be as high as 300 parts/min.

A vibratory bowl feeder for feeding of special plastics caps where the diameter of the cap head was equal to the height of the cap and where the orientation of the cap is particularly difficult.
Elscint Automation, the ISO 9001:2000 certified vibratory bowl feeder manufacturer from India manufactures a vibratory bowl feeder for feeding of special plastics caps where the diameter of the cap head was equal to the height of the cap. Due to these dimensions, achieving the required orientation of open side facing ground for the caps is very difficult and in fact a lot of bowl feeder manufacturers proclaim their inability to orient the same. However, the experienced bowl tooling engineers at Elscint have developed a standard bowl for feeding these types of caps in precisely the manner in which they were required at a very high feed rate of 150 caps per minute.

For this, either the Elscint Vibratory Bowl Feeder Model 250 or Model 400 can be used.

Packing and capping machine manufacturers have this type of requirement.

Elscint vibratory bowl feeders are already the preferred choice amongst the leading manufacturers of such machines in India and they are now getting popular even amongst manufacturers in Europe.

Updated factory automation catalogue features more than 500,000 components in a multitude of size increments, materials and mechanical specifications.
Available now from Misumi is an updated factory automation catalogue, featuring more than 500,000 components in a multitude of size increments, materials and mechanical specifications. Available now from Misumi is an updated factory automation catalogue, featuring more than 500,000 components in a multitude of size increments, materials and mechanical specifications. CAD data are available for the majority of parts.

According to Misumi Marketing Engineer Barry Cox: ‘Not only is our product range huge but the individual size range for each component is truly vast’.

‘In the majority of cases you can choose a component size in increments from as low as 0.01mm’.

‘We have literally hundreds of thousands of sizes’.

‘Behind this huge range of products exists a logistics expertise that allows us to guarantee delivery for most items in just 6-8 working days’.

‘We are also aware that many machine builders only require small quantities of parts’.

Therefore we impose no minimum order quantity or value on any order you place with us’, Cox concludes.

A novel feeding system for feeding half bearings of up to 90mm dia operates at variable speeds up to 60 pieces per minute in an oriented manner and operates unmanned.
Monish Shete, Director of Elscint Automation, the ISO 9001:2000 certified leading Vibratory bowl feeder manufacturer from India informs that Elscint has developed a novel feeding system for feeding of half bearings of various sizes. Half bearings of up to 90mm dia or even more can be fed through this system. This equipment consists of an Elscint Vibratory Hopper Feeder, two Elscint Linear Vibratory Feeders and an Elscint Small Parts (Conveyor) Feeder.

The speed of operation or the feed rate can be up to 60 pieces per minute in an oriented manner.

He further informed that this speed can be varied through a potentiometer.

Additionally electronic controls are provided to synchronize the speed of the various components listed above in order to reduce the manual intervention and setting.

Two models are available, one with PLC control and a lower end model without PLC control to suit the customers’ requirements and budgets.

The Elscint Small Parts (Conveyor) Feeder is used for recirculation of unused parts.

A special orientation device is used for orientation of the half bearings.

Up to 150kg of material can be loaded in the vibratory hopper.

This makes the system totally unmanned and the operator can be utilized to do some other work.

Shete further adds that this system has been found beneficial to various half bearing manufacturers all over the world.

It has helped improve productivity by almost 100% at most of the factories where it has been implemented.

In fact most customers order 10 to 12 units after buying and using one.

Elscint Automation, the ISO 9001:2000 certified vibratory bowl feeder manufacturer now has introduced an automatic tapping machine.
Elscint Automation, the ISO 9001:2000 certified vibratory bowl feeder manufacturer now has introduced an automatic tapping machine. In this machine, the components are fed through a vibratory bowl feeder to the tapping station. At the tapping Station, tapping takes place with the help of a specially designed tapping head attachment.

The completed component is then unloaded in a bin or ejected, as per requirement.

In case of special requirements, tapping at two places can be done on the same component! Speeds of up to 60 Pieces per minute are possible.

This machine is available in two versions, one with PLC Control and one without PLC Control to suit the requirements of customers and their respective budgets.

This machine adds tremendous value wherever there is a requirement of tapping on small components.

Sight Systems is providing a leading digital signage specialist with a point-of-use/sale visual display system offering almost ten times the quality of PAL video systems.
Long experience of custom designing small industrial computers that keep their cool won an order for Sight Systems of Worthing to provide a leading digital signage specialist with a point-of-use/sale visual display system offering almost ten times the quality of PAL video systems. The system is a black box (hardware + software) solution for programme creation, delivery and management for a wide variety of communications platforms such as retailing, exhibitions, travel, etc Clients can create and manage dynamic 4:3 and 16:9 film-quality productions with text, graphics, animation and video. These can be broadcast via corporate intranet or the Internet to a network of screens and, with suitable data input, could be controlled by determiners such as stock levels or traffic density, for example.

Sight Systems’ task was to produce a small, robust, hardware package suitable for wall or under-desk mounting.

The design brief also called for low running temperature and low noise.

Two 60×60x25mm low noise fans on specially designed anti-vibration mountings enhanced natural convection ventilation flow through the chassis top and bottom grid work of CE compliant 3mm holes.

Positioned at the top of the unit, these fans pull 45 cubic feet of air per minute through the chassis.

In addition, a special baffle was designed to duct airflow to cool the hot-running, high specification graphics card.

The hard disk drive was also anti-shock mounted and positioned in line with the cooling air stream.

The fans fitted as standard to the 300-watt power supply were disconnected and low-noise Papst fans with greater airflow were fitted.

A micro ATX motherboard with onboard LAN, Audio and VGA was used and as only one PCI was required, the adjacent space was used for the remainder of the electronics.

The black box solution provided is complete with all required software.

Computer literate personnel are not a necessity to operate the system and, using a special Composer interface provided by the vendor, the user can quickly learn to create new output and manage schedules with minimal training.